GEMCO線性位移傳感器，GEMCO 955型傳感器
更新時間：2017-08-18 點擊次數：1324次
GEMCO線性位移傳感器，GEMCO 955型傳感器
955E系列，eBrik LDT模擬輸出
955 eBrik II線性位移傳感器（LDT）是一種，可編程的零和跨度，自調諧，非接觸式線性位置傳感器，采用經濟實惠的薄型封裝。該傳感器利用我們經過現場驗證的磁致伸縮技術提供位置，可重復感應距離的0.001％。 955 eBrik II?是一種經濟的線性感應解決方案。流線型的陽極氧化鋁擠壓器容納傳感元件和電子元件。磁體移動到確定位置的感測元件上，并將其轉換為可讀輸出。 955 eBrik II是一個獨立的單元，沒有“罐頭”或頭部組件。所有的電子裝置都裝在傳感器中，傳感器小于1英寸高。 955 eBrik可以從1英寸到74英寸長的1英寸增量訂購。磁體滑塊被設計成沿著導軌中的傳感器輕松移動，或者浮動磁體組件可以位于單元上方。應用包括：壓力機，注射成型，舞蹈控制，輪胎和橡膠等等。
95系列，Brik Gen III
95 Brik線性位移傳感器（LDT）是一種，可編程的零和跨度，非接觸式線性位置傳感器，采用經濟實惠的薄型封裝。 Brik是一個獨立的單元，沒有罐頭或頭組件。所有的電子裝置都裝在小于1英寸高的傳感器中。它具有模擬輸出。 95 Brik可以訂購，長度范圍為5英寸至180英寸，增量為0.1英寸。磁體滑塊被設計成沿著導軌中的傳感器輕松移動，或者浮動磁體組件可以位于單元上方。應用包括：壓制，注塑，擠出，輥定位，舞蹈控制，輪胎和橡膠等。
955S系列，智能Brik
955S智能Brik線性位移傳感器（LDT）是一種，可編程的零和跨度，非接觸式線性位置傳感器，采用經濟實惠的薄型封裝。 Brik是一個獨立的單元，沒有罐頭或頭組件。所有的電子裝置都裝在小于1英寸高的傳感器中。它具有模擬輸出。 955S Smart Brik可以訂購，長度從4英寸到180英寸，增量為0.1英寸。磁體滑塊被設計成沿著導軌中的傳感器輕松移動，或者浮動磁體組件可以位于單元上方。應用包括：壓制，注塑，擠出，輥定位，舞蹈控制，輪胎和橡膠等。
GEMCO線性位移傳感器，GEMCO 955型傳感器
955LC系列Brik
955LC BRIK線性位移傳感器（LDT）是一種經濟，低調包裝中的非接觸式線性位置傳感器。 BRIK是一個獨立的單元，沒有罐頭或頭部組件。所有的電子裝置都裝在小于1英寸高的傳感器中。它可用于電壓或電流輸出。單位可以從6英寸到180英寸長，以0.1英寸的增量訂購。磁體滑塊被設計成沿著導軌中的傳感器輕松移動，或者浮動磁體組件可以位于單元上方。磁體滑塊設計成可以沿著導軌中的換能器輕松移動。
955C系列，Brik Gen III
955CA BRIK Gen III線性位移傳感器（LDT）是一種經濟，低調包裝的可編程，自動調諧，非接觸式線性位置傳感器。位置傳感器利用我們現場驗證的磁致伸縮技術給出位置，可重復的可編程感應距離的.006％。流線型的陽極氧化鋁擠壓器容納傳感元件和電子元件。該單元設計用于安裝在氣缸的頂部，并檢測氣缸內的可移動磁體。可以使用電壓，電流，數字和正交輸出。
955D系列，數字Brik第三代
955D Brik線性位移傳感器（LDT）是一種經濟，低調包裝中的非接觸式線性位置傳感器。 Brik是一個獨立的單元，沒有罐頭或頭組件。所有的電子裝置都裝在小于1英寸高的傳感器中。 955D可用于數字（啟動/停止，PWM和控制脈沖）輸出。 Brik可以訂購從5英寸到180英寸長的跨度長度，增量為0.1英寸。磁體滑塊被設計成沿著導軌中的傳感器輕松移動，或者浮動磁體組件可以位于單元上方。應用包括：壓制，注塑，木材，擠出，輥定位，舞蹈控制等等。
955DQ系列，數字正交Brik第三代
955DQ Brik線性位移傳感器（LDT）是一種的非接觸線性位移傳感器，具有經濟，
GEMCO線性位移傳感器，GEMCO 955型傳感器
-
955E Series, eBrik LDT Analog Output
- The 955 eBrik II Linear Displacement Transducer (LDT) is an accurate, programmable zero and span, auto-tuning, non-contact linear position sensor in an economical, low-profile package. The sensor utilizes our field-proven Magnetostrictive technology to provide absolute position, repeatable to .001% of the sensing distance. The 955 eBrik II™ is a cost effective linear sensing solution. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The magnet moves over the sensing element that determines the position and converts it to a readable output. The 955 eBrik II is a self-contained unit and does not have a “can” or head assembly. All of the electronics are incorporated in the sensor, which is less than one inch tall. The 955 eBrik can be ordered in span lengths from 1 inches to 74 inches long in 1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, dancer control, Tire & Rubber and many more.
95 Series, Brik Gen III
- The 95 Brik Linear Displacement Transducer (LDT) is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. It is available with analog outputs. The 95 Brik can be ordered in span lengths from 5 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, extrusion, roll positioning, dancer control, Tire & Rubber and many more.
955S Series, Smart Brik
- The 955S Smart Brik Linear Displacement Transducer (LDT) is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. It is available with analog outputs. The 955S Smart Brik can be ordered in span lengths from 4 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, extrusion, roll positioning, dancer control, Tire and Rubber and many more.
955LC Series Brik
- The 955LC BRIK Linear Displacement Transducer (LDT) is an accurate, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. It is available with voltage or current outputs. Units can be ordered in span lengths from 6 inches up to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. The magnet slide is designed to move effortlessly along the transducer in guide tracks.
955C Series, Brik Gen III
- The 955CA BRIK Gen III Linear Displacement Transducer (LDT) is an accurate programmable, auto tuning, non-contact, linear position sensor in an economical, low profile package. The position sensor utilizes our field proven Magnetostrictive technology to give absolute position, repeatable to .006% of the programmable sensing distance. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The unit is designed to mount on top of a pneumatic cylinder and detect the movable magnet within the cylinder. It can be ordered with voltage, current, digital and Quadrature outputs.
955D Series, Digital Brik Gen III
- The 955D Brik Linear Displacement Transducer (LDT) is an accurate, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. The 955D is available in digital (Start/Stop, PWM and Control Pulse) outputs. The Brik can be ordered in span lengths from 5 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, lumber, extrusion, roll positioning, dancer control and many more.
955DQ Series, Digital Quadrature Brik Gen III
- The 955DQ Brik Linear Displacement Transducer (LDT) is an accurate, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. The 955DQ is available with Quadrature outputs. This new method of interfacing Magnetostrictive transducers offers an interface as common as analog but with the speed and accuracy of pulsed type signaling. The Gemco 955DQ linear transducer provides quadrature output directly from the transducer to the controller. The output from the transducer can be wired directly to any incremental encoder input card, without the need for a special converter module or a PLC interface card designed specifically for use with a pulsed output Magnetostrictive transducer. The Brik can be ordered in span lengths from 5 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the transducer in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, lumber, extrusion, roll positioning, dancer control and many more.
